Difference between revisions of "Eddy Current Brake to Orbit"

From Lunarpedia
Jump to: navigation, search
(Eddy Current Brake to Orbit)
 
(addition)
Line 1: Line 1:
This works by having a long slotted aluminum tube in orbit and having the shuttle vehicle that is launched to orbit enters this slot while the tube is moving by at orbital speed.  The magnetic force from the shuttle is directed at the walls of the tube causing a repulsive force and a retarding force. By reducing the relative speed of the orbiting aluminum tube and the shuttle, the shuttle is brought up to near orbital speed.  Since Eddy current braking loses effectiveness at low relative speeds, friction braking is used to give the shuttle the last 18 meters per second to reach orbital speed and match velocity with the aluminum tube.  The aluminum tube requires electrically enhanced orientational stability which is achieved by shifting masses along the length of the tube to counter any tendency to pitch up or down.  Electrically enhanced rigidity is achieved with electromagnets varying the tension on selected tension members in the structure as is determined to be necessary by continuous laser measurements.  The structural material holding the aluminum in place varies from aluminum to steel as necessary to avoid having the speed of sound in the structure match the speed of the shuttle as it moves through that portion of the tube.  This avoids having a destructive shock wave move through the structure.  The tube requires high specific impulse electric thrusters to maintain orbital momentum when donating some momentum to the less massive shuttle.  Thrusters of sufficient force are possible because they can be made very massive since they would not be supporting their own weight, just restoring the small number of meters per second the tube loses by interaction with the shuttle.  This sort of device is possible for the moon, Mars, and Earth.  A similar device would work for moving from orbital speed to a stop on the lunar surface.  Replacing the simple aluminum of the tube with electrically conductive wires, insulation, and electrical power storage would recover some of the energy lost in the momentum transfer from the tube to the shuttle.  This device could be built when it becomes economical to ship large masses of construction material from Luna to lunar orbit.
+
This works by having a long slotted aluminum tube in orbit and having the shuttle vehicle that is launched to orbit enters this slot while the tube is moving by at orbital speed.  The magnetic force from the shuttle is directed at the walls of the tube causing a repulsive force and a retarding force.<ref>[http://www.lunarpedia.org/index.php?title=Eddy_Current_Brake_to_Orbit ''Eddy current brake'' at Wikipedia]</ref> By reducing the relative speed of the orbiting aluminum tube and the shuttle, the shuttle is brought up to near orbital speed.  Since Eddy current braking loses effectiveness at low relative speeds, friction braking is used to give the shuttle the last 18 meters per second to reach orbital speed and match velocity with the aluminum tube.  The aluminum tube requires electrically enhanced orientational stability which is achieved by shifting masses along the length of the tube to counter any tendency to pitch up or down.  Electrically enhanced rigidity is achieved with electromagnets varying the tension on selected tension members in the structure as is determined to be necessary by continuous laser measurements.  The structural material holding the aluminum in place varies from aluminum to steel as necessary to avoid having the speed of sound in the structure match the speed of the shuttle as it moves through that portion of the tube.  This avoids having a destructive shock wave move through the structure.  The tube requires high specific impulse electric thrusters to maintain orbital momentum when donating some momentum to the less massive shuttle.  Thrusters of sufficient force are possible because they can be made very massive since they would not be supporting their own weight, just restoring the small number of meters per second the tube loses by interaction with the shuttle.  This sort of device is possible for the moon, Mars, and Earth.  A similar device would work for moving from orbital speed to a stop on the lunar surface.  Replacing the simple aluminum of the tube with electrically conductive wires, insulation, and electrical power storage would recover some of the energy lost in the momentum transfer from the tube to the shuttle.  This device could be built when it becomes economical to ship large masses of construction material from Luna to lunar orbit.  
 +
 +
==reference==
 +
<references/>

Revision as of 22:27, 23 August 2012

This works by having a long slotted aluminum tube in orbit and having the shuttle vehicle that is launched to orbit enters this slot while the tube is moving by at orbital speed. The magnetic force from the shuttle is directed at the walls of the tube causing a repulsive force and a retarding force.[1] By reducing the relative speed of the orbiting aluminum tube and the shuttle, the shuttle is brought up to near orbital speed. Since Eddy current braking loses effectiveness at low relative speeds, friction braking is used to give the shuttle the last 18 meters per second to reach orbital speed and match velocity with the aluminum tube. The aluminum tube requires electrically enhanced orientational stability which is achieved by shifting masses along the length of the tube to counter any tendency to pitch up or down. Electrically enhanced rigidity is achieved with electromagnets varying the tension on selected tension members in the structure as is determined to be necessary by continuous laser measurements. The structural material holding the aluminum in place varies from aluminum to steel as necessary to avoid having the speed of sound in the structure match the speed of the shuttle as it moves through that portion of the tube. This avoids having a destructive shock wave move through the structure. The tube requires high specific impulse electric thrusters to maintain orbital momentum when donating some momentum to the less massive shuttle. Thrusters of sufficient force are possible because they can be made very massive since they would not be supporting their own weight, just restoring the small number of meters per second the tube loses by interaction with the shuttle. This sort of device is possible for the moon, Mars, and Earth. A similar device would work for moving from orbital speed to a stop on the lunar surface. Replacing the simple aluminum of the tube with electrically conductive wires, insulation, and electrical power storage would recover some of the energy lost in the momentum transfer from the tube to the shuttle. This device could be built when it becomes economical to ship large masses of construction material from Luna to lunar orbit.

reference