Difference between revisions of "Ilmenite Reduction"

From Lunarpedia
Jump to: navigation, search
m (moving __TOC__)
 
(31 intermediate revisions by 10 users not shown)
Line 1: Line 1:
{{Expand}}
+
{|align=right
 +
  |__TOC__
 +
  |}
 +
== Introduction ==
 +
[[Reduction|Reducing]] [[ilmenite]] (FeTiO<SUB>3</SUB>) to produce [[oxygen]], [[iron]], and [[titanium]] in a lunar context has produced a number of proposals, many of them specifically aimed at oxygen production. Ilmenite is attractive for this purpose as the iron oxides it contains require less energy to reduce than any other oxide on the lunar surface. For this reason, proposals which have oxygen production as the primary goal usually focus on reduction of the iron content of ilmenite.
 +
 
 +
==Hydrogen Reduction==
 
[[image:ilmen_reduced.GIF|thumb|Lunar Ilmenite reduced at 1050°C by hydrogen for 3 hrs]]
 
[[image:ilmen_reduced.GIF|thumb|Lunar Ilmenite reduced at 1050°C by hydrogen for 3 hrs]]
[[Reduction]] of [[ilmenite]] (FeTiO<SUB>3</SUB>) is a chemical reaction proposed for use in production of  oxygen ([[LUNOX]]) from lunar resources.  
+
[[Hydrogen]] reduction is one method currently being tested by many Universities.  Products of hydrogen reduction are free [[iron]], [[rutile|titanium dioxide (TiO<sub>2</sub>)]], and [[water]], which is [[Water Splitting|split]] to recover the hydrogen and produce [[oxygen]].
  
 +
The basic process is to separate ilmenite from lunar soil, crush it to a fine powder to maximize the surface area, and then heat it in an enclosed reaction vessel in the presence of hydrogen gas. The steam produced in the reaction is then condensed and [[Water Splitting|split]] to produce oxygen and recover the hydrogen.
  
==Hydrogen Reduction==
+
This process is best utilized if the plant is sited in a location in which ilmenite composes a high fraction of the soil.
[[Hydrogen]] reduction is one method currently being tested by many Universities.  Products of the hydrogen reduction are free [[iron]], [[rutile|titanium dioxide (TiO<sub>2</sub>)]], and [[water]].  The resulting water can be removed by condensation and separated via electrolysis to produce oxygen and H<SUB>2</SUB> (hydrogen).  The hydrogen is then be recycled into the reaction.
 
  
The basic process sequence is to separate ilmenite from lunar soil, crush it to a fine powder to maximize the surface area, heat the ilmenite in an enclosed reaction vessel in the presence of hydrogen gas, condense the steam which is produced by the reaction, and then use electrolysis to separate the water into hydrogen and oxygen. The process is best utilized if the plant is sited in a location in which ilmenite composes a high fraction of the soil.
+
The reaction sequence is:
 +
*''Reduction'': FeTiO<SUB>3</SUB>+H<SUB>2</SUB> ---->Fe+TiO<SUB>2</SUB>+H<SUB>2</SUB>O
 +
*''Water Splitting'': 2H<SUB>2</SUB>O ---->2 H<SUB>2</SUB>+ O<SUB>2</SUB>
 +
*''Net Reaction'': 2FeTiO<SUB>3</SUB>----> 2Fe+2TiO<SUB>2</SUB>+ O<SUB>2</SUB>
  
The reaction sequence is:
+
The iron produced in the process could be separated out by [[Carbonyl process| carbonyl extraction]], or by grinding the result again and using a magnet. The [[rutile|titanium dioxide]] could also be further [[Lunar Titanium Production|reduced to produce metallic titanium and additional oxygen]].
<BR/><BR/>
 
''Reduction'':<BR/>
 
FeTiO<SUB>3</SUB>+H<SUB>2</SUB> ---->Fe+TiO<SUB>2</SUB>+H<SUB>2</SUB>O
 
<BR/>''Electrolysis'':
 
<BR>
 
2H<SUB>2</SUB>O  ---->2 H<SUB>2</SUB>+ O<SUB>2</SUB>
 
<BR>
 
''Net Reaction'': <BR/>2FeTiO<SUB>3</SUB>---->2Fe+2TiO<SUB>2</SUB>+ O<SUB>2</SUB>
 
<BR/>
 
  
 
==Carbothermal Reduction==
 
==Carbothermal Reduction==
  
Oxygen can be retrieved from [[Ilmenite|Ilmenite (FeTiO<sub>3</sub>)]] and [[Rutile|Rutile (TiO<sub>2</sub>)]] by means of carbothermal reduction.  In [http://www.mtec.or.th/th/seminar/msativ/pdf/CP12.pdf experiments], powdered [[carbon]] and powdered ilmenite were evenly mixed and then heated to 1500 degrees Celsius.  The end products of this reaction are Oxygen and a high strength Ceramic-metal composite (Cermet) of [[iron|Iron (Fe)]] and Titanium Carbide (TiC) which has high chemical stability.  The amount of reinforcing TiC ceramic in the matrix can be controlled via the amount of rutile and carbon used.  While this method provides a means of retrieving all of the oxygen from ilmenite/rutile and a potential for producing reinforced, high performance and wear components and cutting tools from lunar regolith, it is at the cost of highly valuable carbon needed for biological processes.  The process will also require the separation of ilmenite/rutile from regolith by some means.
+
Oxygen can be retrieved from [[Ilmenite|Ilmenite (FeTiO<sub>3</sub>)]] and [[Rutile|Rutile (TiO<sub>2</sub>)]] by means of carbothermal reduction.  In experiments, powdered [[carbon]] and powdered ilmenite/rutile were evenly mixed and then heated to 1500 degrees Celsius.  The end products of this reaction are Oxygen and a high strength Ceramic-metal composite (Cermet) of [[iron|Iron (Fe)]] and Titanium Carbide (TiC) which has high chemical stability.  The amount of reinforcing TiC ceramic in the matrix can be controlled via the amount of rutile and carbon used<ref>http://www.mtec.or.th/th/seminar/msativ/pdf/CP12.pdf</ref>.  While this method provides a means of retrieving all of the oxygen from ilmenite/rutile and a potential for producing reinforced, high performance and wear components and cutting tools from lunar regolith, it is at the cost of highly valuable carbon needed for biological processes.
  
 
Stoichiometry for this reaction:
 
Stoichiometry for this reaction:
 
<BR/><BR/>
 
<BR/><BR/>
 +
''Ilmenite'':<BR/>
 +
FeTiO<sub>3</sub> + 4C ---->Fe + TiC + 3CO
 +
<BR/><BR/>
 +
''Ilmenite and Rutile'':<BR/>
 
FeTiO<sub>3</sub> + nTiO<sub>2</sub> + (4+3n)C ---->Fe + (1+n)TiC + (3+2n)CO
 
FeTiO<sub>3</sub> + nTiO<sub>2</sub> + (4+3n)C ---->Fe + (1+n)TiC + (3+2n)CO
 
<BR>Where n represents the number of TiO<sub>2</sub> molecules
 
<BR>Where n represents the number of TiO<sub>2</sub> molecules
  
==Li or Na reduction of Ilmenite==
+
===Reduction with CO===
+
This reaction is based on a fluidized bed scheme which is similar to large scale proposals for Hydrogen Reduction.  The product of CO reduction of Ilmenite is [[Carbon Dioxide|Carbon Dioxide (CO<sub>2</sub>)]], which is [[Lunar Carbon Production#Direct CO2 Electrolysis|reduced]] to [[Carbon Monoxide|CO]] and [[oxygen]]. The [[Carbon Monoxide|CO]] is recirculated, and the oxygen stored.<ref>http://www.uapress.arizona.edu/onlinebks/ResourcesNearEarthSpace/resources04.pdf page 9</ref>.  The presence of solar wind implanted carbon in the regolith will allow the recovery of additional carbon if recycling efficiency is sufficiently great, though a method for dealing with evolved methane (CH<sub>4</sub>, from hydrogen present in the regolith) would be required. The CO reduction of ilmenite is slower than the H<sub>2</sub> process, but by less than an order of magnitude for any given temperature.
 +
 
 +
The reaction sequence is:
 +
<BR/><BR/>
 +
''Reduction'':<BR/>
 +
FeTiO<sub>3</sub> + CO ---->Fe + TiO<sub>2</sub> + CO<sub>2</sub>
 +
<BR/>
 +
''Endothermic cracking'':<BR/>
 +
2CO<sub>2</sub> ----> 2CO + O<sub>2</sub>
 +
<BR/>
 +
''Net Reaction'': <BR/>
 +
2FeTiO<sub>3</sub> + 2CO ---->2Fe + 2TiO<sub>2</sub> + 2CO + O<sub>2</sub>
 +
<BR/>
 +
 
 +
==Methane Reduction==
 
{| cellpadding="10" style="border-style:none;border-width:0px"
 
{| cellpadding="10" style="border-style:none;border-width:0px"
| style="border-style:dashed; border-width:1px; border-color:#36648B; background:#F0F8FF;" | '''Please note:'''<br>
+
| style="border-style:dashed; border-width:1px; border-color:#36648B; background:#F0F8FF;" | '''Please note: Methane Reduction'''<br>
 
This section is a placeholder for work currently in progress.<br>-- [[User:Jarogers2001|Jarogers2001]] 22:59, 31 May 2008 (UTC)
 
This section is a placeholder for work currently in progress.<br>-- [[User:Jarogers2001|Jarogers2001]] 22:59, 31 May 2008 (UTC)
 
|}
 
|}
 +
==Li or Na Reduction==
 +
==Plasma Reduction==
 +
 +
== Electrolytic Reduction ==
 +
see [[FFC Cambridge Process]]
 +
 +
 +
== References ==
 +
<references/>
  
==Other Methods of Ilmenite reduction==
+
== Related Pages ==
Li or Na reduction of Ilmenite<BR/>
+
*[[Lunar Titanium Production]]
Methane reduction of Ilmenite<BR/>
 
Plasma reduction of Ilmenite<BR/>
 
  
 
==External Links==
 
==External Links==
Line 47: Line 72:
 
*[http://ares.jsc.nasa.gov/HumanExplore/Exploration/EXLibrary/DOCS/EIC048.HTML Lunar Oxygen Production - A Maturing Technology]
 
*[http://ares.jsc.nasa.gov/HumanExplore/Exploration/EXLibrary/DOCS/EIC048.HTML Lunar Oxygen Production - A Maturing Technology]
 
*[http://www.mtec.or.th/th/seminar/msativ/pdf/CP12.pdf The Effect of TiO2 on Synthesizing Fe-TiC Composites]
 
*[http://www.mtec.or.th/th/seminar/msativ/pdf/CP12.pdf The Effect of TiO2 on Synthesizing Fe-TiC Composites]
 +
*[http://www.nss.org/settlement/spaceresources/resources2.html Resources of Near-Earth Space.  Univ. of Arizona Press]
 
<BR/><BR/><BR/>
 
<BR/><BR/><BR/>
  
Line 54: Line 80:
 
[[Category:Chemistry]]
 
[[Category:Chemistry]]
 
[[Category:ISRU]]
 
[[Category:ISRU]]
 +
[[Category:Industrial Production]]

Latest revision as of 17:19, 2 May 2013

Introduction

Reducing ilmenite (FeTiO3) to produce oxygen, iron, and titanium in a lunar context has produced a number of proposals, many of them specifically aimed at oxygen production. Ilmenite is attractive for this purpose as the iron oxides it contains require less energy to reduce than any other oxide on the lunar surface. For this reason, proposals which have oxygen production as the primary goal usually focus on reduction of the iron content of ilmenite.

Hydrogen Reduction

Lunar Ilmenite reduced at 1050°C by hydrogen for 3 hrs

Hydrogen reduction is one method currently being tested by many Universities. Products of hydrogen reduction are free iron, titanium dioxide (TiO2), and water, which is split to recover the hydrogen and produce oxygen.

The basic process is to separate ilmenite from lunar soil, crush it to a fine powder to maximize the surface area, and then heat it in an enclosed reaction vessel in the presence of hydrogen gas. The steam produced in the reaction is then condensed and split to produce oxygen and recover the hydrogen.

This process is best utilized if the plant is sited in a location in which ilmenite composes a high fraction of the soil.

The reaction sequence is:

  • Reduction: FeTiO3+H2 ---->Fe+TiO2+H2O
  • Water Splitting: 2H2O ---->2 H2+ O2
  • Net Reaction: 2FeTiO3----> 2Fe+2TiO2+ O2

The iron produced in the process could be separated out by carbonyl extraction, or by grinding the result again and using a magnet. The titanium dioxide could also be further reduced to produce metallic titanium and additional oxygen.

Carbothermal Reduction

Oxygen can be retrieved from Ilmenite (FeTiO3) and Rutile (TiO2) by means of carbothermal reduction. In experiments, powdered carbon and powdered ilmenite/rutile were evenly mixed and then heated to 1500 degrees Celsius. The end products of this reaction are Oxygen and a high strength Ceramic-metal composite (Cermet) of Iron (Fe) and Titanium Carbide (TiC) which has high chemical stability. The amount of reinforcing TiC ceramic in the matrix can be controlled via the amount of rutile and carbon used[1]. While this method provides a means of retrieving all of the oxygen from ilmenite/rutile and a potential for producing reinforced, high performance and wear components and cutting tools from lunar regolith, it is at the cost of highly valuable carbon needed for biological processes.

Stoichiometry for this reaction:

Ilmenite:
FeTiO3 + 4C ---->Fe + TiC + 3CO

Ilmenite and Rutile:
FeTiO3 + nTiO2 + (4+3n)C ---->Fe + (1+n)TiC + (3+2n)CO
Where n represents the number of TiO2 molecules

Reduction with CO

This reaction is based on a fluidized bed scheme which is similar to large scale proposals for Hydrogen Reduction. The product of CO reduction of Ilmenite is Carbon Dioxide (CO2), which is reduced to CO and oxygen. The CO is recirculated, and the oxygen stored.[2]. The presence of solar wind implanted carbon in the regolith will allow the recovery of additional carbon if recycling efficiency is sufficiently great, though a method for dealing with evolved methane (CH4, from hydrogen present in the regolith) would be required. The CO reduction of ilmenite is slower than the H2 process, but by less than an order of magnitude for any given temperature.

The reaction sequence is:

Reduction:
FeTiO3 + CO ---->Fe + TiO2 + CO2
Endothermic cracking:
2CO2 ----> 2CO + O2
Net Reaction:
2FeTiO3 + 2CO ---->2Fe + 2TiO2 + 2CO + O2

Methane Reduction

Please note: Methane Reduction

This section is a placeholder for work currently in progress.
-- Jarogers2001 22:59, 31 May 2008 (UTC)

Li or Na Reduction

Plasma Reduction

Electrolytic Reduction

see FFC Cambridge Process


References

Related Pages

External Links